7 WAYS to Fix a Fire TV Remote That's Not Pairing

If your Fire TV remote isn’t pairing, you’re not alone. This is a common problem that can be caused by a variety of factors. In this guide, I’ll walk you through the steps to fix a Fire TV remote and get your remote working again.

I’ve seen multiple instances of Fire TV remote problems. In my experience, the most common causes of a Fire TV remote not pairing are:

The remote is out of range: The Fire TV remote uses Bluetooth to communicate with your TV, so it’s important to make sure that the remote is within 30 feet of the TV.
The remote is low on battery: If the remote’s battery is low, it may not have enough power to pair with the TV.
The TV is in pairing mode: The TV must be in pairing mode in order to connect to the remote. To put the TV in pairing mode, press and hold the “Menu” and “Back” buttons on the TV remote for five seconds.

Fix A Fire TV remote That’s Not pairing, You can try the following steps:

1. Make sure that the remote is within 30 feet of the TV.
2. Check the battery level of the remote. If the battery is low, replace it with a new battery.
3. Put the TV in pairing mode. To do this, press and hold the “Menu” and “Back” buttons on the TV remote for five seconds.
4. Press the “Home” button on the remote. The remote should now be paired with the TV.

If you’ve tried these steps and your remote is still not pairing, you may need to contact Amazon customer support for further assistance.

I hope this guide helps you fix a Fire TV remote and make it work again!

Also read: How To Sync LED Strip With TV For Backlight?

Table of Contents

How to Fix a Fire TV Remote?

Your Fire TV remote is an essential part of your streaming experience. But what happens when it stops working? If your Fire TV remote is not pairing, there are a few things you can try to fix the problem.

1. Check the batteries

The most common reason for a Fire TV remote not pairing is that the batteries are dead. Make sure that the batteries are installed correctly and that they are not too old. If the batteries are still fresh, try replacing them with a new set.

2. Reset the remote

How to Fix a Fire TV Remote That's Not Pairing

If your Fire TV remote is still not pairing, you can try resetting it. To do this, hold down the power and home buttons on the remote for about 10 seconds. The remote will turn off and then back on. Once it has turned back on, try pairing it with your Fire TV again.

3. Check your Fire TV settings

Make sure that your Fire TV is set to accept remote pairing. To do this, go to the Settings menu on your Fire TV and select Remotes & Bluetooth Devices. Under Remotes, make sure that the Pair a New Remote option is enabled.

4. Update your Fire TV software

There may be a software update available for your Fire TV that could fix the problem. To check for updates, go to the Settings menu on your Fire TV and select System. Under System Updates, select Check for Updates. If an update is available, install it and then try pairing your remote again.

5. Factory reset your Fire TV

If none of the above solutions work, you can try factory resetting your Fire TV. This will erase all of your data, so make sure to back up anything important before you do it. To factory reset your Fire TV, go to the Settings menu and select System. Under System Options, select Reset to Factory Defaults.

6. Contact Amazon support

If you have tried all of the above solutions and your Fire TV remote is still not pairing, you can contact Amazon support for help. They may be able to troubleshoot the problem or send you a replacement remote.

7. Buy a new remote

If all else fails, you can always buy a new Fire TV remote. You can find replacement remotes on Amazon or at other retailers. If you don’t want to buy a new remote you can download Fire TV app from Google Play Store.

Also read: How to Fix LED Light Remote: 3 Easy Ways

FAQs

Below you can find our most frequently and widely asked question on How to fix a fire TV remote which is not working.

Why is my Fire TV remote not pairing?

There are a few reasons why your Fire TV remote might not be pairing.

The remote is out of range. The Fire TV remote uses Bluetooth to connect to your Fire TV device. If the remote is too far away from the device, it won’t be able to connect.
The remote is not paired with the device. If you have recently reset your Fire TV device, you may need to re-pair the remote. To do this, hold down the Home button on the remote for 10 seconds. The remote will blink twice and then you will be able to pair it with your device.
The remote is damaged. If the remote is damaged, it may not be able to connect to your Fire TV device. Try replacing the batteries or checking for physical damage.

How do I pair my Fire TV remote?

To pair your Fire TV remote, follow these steps:

1. Turn on your Fire TV device.
2. Hold down the Home button on the remote for 10 seconds. The remote will blink twice.
3. On the Fire TV screen, select Settings > Remotes & Bluetooth Devices > Add New Remote.
4. Follow the on-screen instructions to pair the remote.

What can I do if my Fire TV remote is still not working?

If your Fire TV remote is still not working, there are a few things you can try:

Try resetting the remote. To do this, hold down the Back button and the Volume Down button on the remote for 10 seconds. The remote will blink twice and then you will need to re-pair it with your device.
Try replacing the batteries in the remote. If the batteries are old or damaged, they may not be able to power the remote properly.
Try using a different remote. If you have another Fire TV remote, try using it to see if the problem is with the remote or with your device.
Contact Amazon customer support. If you have tried all of the above steps and your remote is still not working, you can contact Amazon customer support for help.

How do I update my Fire TV remote?

To update your Fire TV remote, follow these steps:

1. Turn on your Fire TV device.
2. Go to Settings > System > About.
3. Under Software Updates, select Check for Updates.
4. If there is an update available, follow the on-screen instructions to install it.
5. Your Fire TV remote will now be updated to the latest version.

You may also like: Do Smart Bulbs Work Without WiFi?

Conclusion

In conclusion, troubleshooting a Fire TV remote that isn’t pairing can restore functionality and enhance your streaming experience, avoiding the frustration of not being able to control your device. The first step in resolving this issue is to ensure that the remote is properly powered by checking and, if necessary, replacing the batteries. Weak or depleted batteries are often the culprit in pairing failures. Additionally, resetting the remote by removing the batteries and pressing all buttons in succession can release any residual charges that might be causing communication errors. It’s also vital to ensure that there are no obstructions between the remote and the Fire TV device and that the remote is within range of the receiver.

Furthermore, if initial troubleshooting steps fail, it’s important to delve deeper by rebooting the Fire TV device itself, which can resolve many connectivity issues by refreshing the system. In situations where the remote still fails to pair, one may consider using the Fire TV app on a smartphone as a temporary solution while continuing to troubleshoot the physical remote. For more persistent issues, contacting customer support or seeking a replacement remote may be necessary. By methodically following these steps, users can often resolve pairing issues without the need for professional help, ensuring that their Fire TV continues to provide access to entertainment with minimal interruption. This not only saves time and money but also empowers users by enhancing their technical skills and understanding of their devices.

How to Fix a Fire TV Remote That’s Not Pairing?